M21097 1-172 NSN Part from Cinch Clamp Co Inc with NSN 5935009195835- Request A Quote

Part Number:  M21097 1-172
Alternate P/N:  M210971172
Manufacturer:  cinch clamp co inc
NIIN:  00-919-5835
CAGE Code:  54492
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  15093
Country:  USA
NCB Code:  00
We’re pleased to announce that part number M21097 1-172 is now available and in stock. This is a Connector Receptacle Electrical with NSN 5935-00-919-5835 manufactured by Cinch Clamp Co Inc. You can now request a near instantaneous quote for part number M21097 1-172, just fill out the Request for Quote (RFQ) provided here to get started.

As you fill out the RFQ for M21097 1-172, make sure that all fields, especially the asterisk-marked ones like Need Parts By and Quantity (ea), are completely filled out. Our sales team will be using your response to these fields in order to understand your requirements and calculate your quote accordingly. And they will contact you with your final quote within 15 minutes or less.  

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for M21097 1-172

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

ASAP Part Services, owned and operated by ASAP Semiconductor, is an experienced and leading distributor of obsolete and hard-to-find aviation and electronic parts in the United States. We are an AS9120B, ISO 9001:2015, and FAA AC 0056B certified member of the Aviation Suppliers Association (ASA). Our vast and comprehensive inventory has more than 2 billion unique parts sourced from over 5000 industry-leading manufacturers like Cinch Clamp Co Inc from around the world. And we can ship the part like M21097 1-172 to you with same-day or next-day shipping thanks to our shipping centers in California.

For any questions or concerns, feel free to call us at +1-714-705-4780, or email us at sales@asap-partservices.com. We’re always available and ready to help, 24/7x365. And if you’re interested in a faster and more convenient purchasing platform.

NSN Information for Part Number M21097 1-172 with NSN 5935-00-919-5835, 5935009195835

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-919-5835

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350091958350PA
CIICHCCESDPMICCriticalityENAC
UAG0
Part NumberISCRNVCRNCCHCCMSDSSADC
50-44B-10M323

Characteristics Data of NSN 5935-00-919-5835, 5935009195835

MRCCriteriaCharacteristic
AAQLBODY STYLESTRAIGHT EDGE TYPE W/MOUNTING FLANGE
ABHPOVERALL LENGTH4.360 INCHES MAXIMUM
ABKWOVERALL HEIGHT0.406 INCHES MINIMUM
ABMKOVERALL WIDTH0.333 INCHES MINIMUM AND 0.353 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND VIBRATION RESISTANT
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.116 INCHES NOMINAL
AEJNDISTANCE BETWEEN MOUNTING FACILITY CENTERS4.024 INCHES MINIMUM AND 4.040 INCHES MAXIMUM
AFQPBOARD ACCOMMODATED LENGTH3.588 INCHES MINIMUM AND 3.604 INCHES MAXIMUM
AFQVBOARD ACCOMMODATED WIDTH0.054 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLE2 ROWS OF INDEPENDENT CONTACTS INSERTED BOARD SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS5.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODCONTACT TO CONTACT POLARIZING KEYS
AFRTSHELL TYPESOLID
CQTMTERMINAL LOCATIONSIDE SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPETAB,SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING
CSPTSHELL MATERIALPLASTIC DIALLYL PHTHALATE
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-M-19833,TY GDI-30F MIL SPEC SINGLE TREATMENT RESPONSE
CXCGINCLUDED CONTACT QUANTITY44 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEBIFURCATED SPRING SINGLE MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.044 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
TESTTEST DATA DOCUMENT81349-MIL-C-21097 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-C-21097/1 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

ASAP Semiconductor’s Certifications and Memberships


Submit an RFQ Form and Get an Interactive Online Quote

Thanks for Visiting ASAP Parts Services!

Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top