444-0005-042 with NSN 5905005773656 of Clarostat Sensors And Controls - Request A Quote

Part Number:  444-0005-042
Alternate P/N:  4440005042
NIIN:  00-577-3656
CAGE Code:  12697
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37406
Country:  USA
NCB Code:  00
We’re pleased to announce that part number 444-0005-042 is now available and in stock. This is a Resistor Variable Wire Wound Non with NSN 5905-00-577-3656 manufactured by Clarostat Sensors And Controls. You can now request a near instantaneous quote for part number 444-0005-042, just fill out the Request for Quote (RFQ) provided here to get started.


As you fill out the RFQ for 444-0005-042, make sure that all fields, especially the asterisk-marked ones like Need Parts By and Quantity (ea), are completely filled out. Our sales team will be using your response to these fields in order to understand your requirements and calculate your quote accordingly. And they will contact you with your final quote within 15 minutes or less.  

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 444-0005-042

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

ASAP Part Services, owned and operated by ASAP Semiconductor, is an experienced and leading distributor of obsolete and hard-to-find aviation and electronic parts in the United States. We are an AS9120B, ISO 9001:2015, and FAA AC 0056B certified member of the Aviation Suppliers Association (ASA). Our vast and comprehensive inventory has more than 2 billion unique parts sourced from over 5000 industry-leading manufacturers like Clarostat Sensors And Controls from around the world. And we can ship the part like 444-0005-042 to you with same-day or next-day shipping thanks to our shipping centers in California.

For any questions or concerns, feel free to call us at +1-714-705-4780, or email us at sales@asap-partservices.com. We’re always available and ready to help, 24/7x365. And if you’re interested in a faster and more convenient purchasing platform.

NSN Information for Part Number 444-0005-042 with NSN 5905-00-577-3656, 5905005773656

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-577-3656

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050057736560NA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
RA20LAXB103A31CA

Characteristics Data of NSN 5905-00-577-3656, 5905005773656

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1.164 INCHES MINIMUM AND 1.326 INCHES MAXIMUM
ABPMBODY DIAMETER1.100 INCHES MINIMUM AND 1.310 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
ABXFSHAFT LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
ADAQBODY LENGTH0.570 INCHES MINIMUM AND 0.670 INCHES MAXIMUM
ADAVOVERALL DIAMETER1.750 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION290.0 MINIMUM AND 305.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE6.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE128.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 9 OCLOCK
AEFPNONTURN DEVICE RADIUS0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODLOCKING BUSHING
CQCCELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG290.0 MINIMUM AND 305.0 MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
FEATSPECIAL FEATURES5905-840-1044 QUALITY CONTROLLED FOR POLARIS
TESTTEST DATA DOCUMENT81349-MIL-R-19 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-R-19/2 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q22rcx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 658 - Electrical appliances, small
USA Flag

We are proud to supply every branch of the United States military


Why Choose Us

Quotes within 15 minutes

Competitive Prices

Dedicated and Knowledgeable
Account Managers

AOG Services 24/7 x 365

Same-day
and Next-day Delivery

ASAP Semiconductor’s Certifications and Memberships


Submit an RFQ Form and Get an Interactive Online Quote

Thanks for Visiting ASAP Parts Services!

Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top