7010022-4 NSN Part from Electrodynamics Inc with NSN 5905000546502- Request A Quote

Part Number:  7010022-4
Alternate P/N:  70100224
Manufacturer:  electrodynamics inc
NIIN:  00-054-6502
CAGE Code:  10236
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37406
Country:  USA
NCB Code:  00
We’re pleased to announce that part number 7010022-4 is now available and in stock. This is a Resistor Variable Wire Wound Non with NSN 5905-00-054-6502 manufactured by Electrodynamics Inc. You can now request a near instantaneous quote for part number 7010022-4, just fill out the Request for Quote (RFQ) provided here to get started.

As you fill out the RFQ for 7010022-4, make sure that all fields, especially the asterisk-marked ones like Need Parts By and Quantity (ea), are completely filled out. Our sales team will be using your response to these fields in order to understand your requirements and calculate your quote accordingly. And they will contact you with your final quote within 15 minutes or less.  

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 7010022-4

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

ASAP Part Services, owned and operated by ASAP Semiconductor, is an experienced and leading distributor of obsolete and hard-to-find aviation and electronic parts in the United States. We are an AS9120B, ISO 9001:2015, and FAA AC 0056B certified member of the Aviation Suppliers Association (ASA). Our vast and comprehensive inventory has more than 2 billion unique parts sourced from over 5000 industry-leading manufacturers like Electrodynamics Inc from around the world. And we can ship the part like 7010022-4 to you with same-day or next-day shipping thanks to our shipping centers in California.

For any questions or concerns, feel free to call us at +1-714-705-4780, or email us at sales@asap-partservices.com. We’re always available and ready to help, 24/7x365. And if you’re interested in a faster and more convenient purchasing platform.

NSN Information for Part Number 7010022-4 with NSN 5905-00-054-6502, 5905000546502

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-054-6502

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

5905000546502NA
CIICHCCESDPMICCriticalityENAC
AU
Part NumberISCRNVCRNCCHCCMSDSSADC
4171784-27B25

Characteristics Data of NSN 5905-00-054-6502, 5905000546502

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
ABHPOVERALL LENGTH1.723 INCHES MINIMUM AND 1.877 INCHES MAXIMUM
ABJTTERMINAL LENGTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
ABKWOVERALL HEIGHT0.749 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
ABMKOVERALL WIDTH0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
ABTBMOUNTING HOLE DIAMETER0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
ABXFSHAFT LENGTH0.036 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
ADAQBODY LENGTH1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM
ADATBODY WIDTH0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
ADAUBODY HEIGHT0.312 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEEZCONTACT ARM ELECTRICAL OFF POSITIONFULLY CCW
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION6120.0 MINIMUM AND 9720.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE8.00 INCH-OUNCES
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.700 INCHES NOMINAL
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
AKPVMOUNTING FACILITY QUANTITY2
APXHTERMINAL LOCATIONREAR END
AXGYMOUNTING METHODUNTHREADED HOLE
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL
CQCCELECTRICAL RESISTANCE PER SECTION20.000 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG7920.0 NOMINAL
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.7 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 PIN

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

ASAP Semiconductor’s Certifications and Memberships


Submit an RFQ Form and Get an Interactive Online Quote

Thanks for Visiting ASAP Parts Services!

Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top