ASAP Part Services, owned and operated by ASAP Semiconductor, has over 6 billion parts inventoried. This includes new, old, used, and obsolete parts, such as 003-1377-00, 091-286609, 23002208, 3402, 3R3070G01. As an ISO 9001:2015 certified and FAA AC 00-56B accredited company, we go to great lengths to ensure we are delivering quality parts. We partner exclusively with reliable manufacturers such as Tektronix Inc, Doall Baltimore Company, Allison Transmission Holdings Inc, General Signal Corp, Ge Aviations Systems Llc. Our team provides superior quality assurance testing for and more. So if you are in need of Gage Flush Pin Plain Cylindrical or any other NSN parts, submit an Instant RFQ and receive a quote in as little as 15 minutes.
Part No Part No
|
NSN NSN Parts
|
Details Item Name
|
QTY QTY
|
RFQ RFQ
|
---|---|---|---|---|
003-1377-00 | 5220-01-383-6971 | NA | Avl | RFQ |
091-286609 | 5220-01-566-8447 | End Item Identification: Band Saw Part Name Assigned By Controlling Agency: Filler View Gage Criticality Code Justification: Agav | Avl | RFQ |
23002208 | 5220-01-129-7811 | Special Features: Gage Pin, Turbine Rotor Axial Position;Consists Of 1 Pin, Matl Sae 02 Hdn Rc 46-50;7.086 In. Long, Point Is0.50 In., Surface Texture 32.15 Degrees;1 Spring Pin, Mfr 56878 P/N 23-5-034-0625, Matl Std Pressed Stl End Item Identification: Tf41 Engine | Avl | RFQ |
3402 | 5220-00-672-4059 | Special Features: Gage, Flush Pin | Avl | RFQ |
3R3070G01 | 5220-01-658-8285 | NA | Avl | RFQ |
3R3070G02 | 5220-01-658-8285 | NA | Avl | RFQ |
400-8652 | 5220-01-276-7226 | Special Features: Used To Establish An Initial Setting Of The Adjustment Screw On The Pressure Relief Valve Assembly During Assembly Of The Main Fuel Gear Pump; A Cylindrical Device With A Tee Handled Adjustment Screw Through Its Axis And Several Protruding Pin Details; Black Oxide Finish, Weight; 2 Lbs; Size, 4 1/4 In. Long X 2 1/2 In. Dia., Used In Conjunction With Pressure Relief Valve Holding Fixture End Item Identification: F100-Pw-100/200/220 | Avl | RFQ |
400-8652 | 5220-01-276-7226 | Special Features: Used To Establish An Initial Setting Of The Adjustment Screw On The Pressure Relief Valve Assembly During Assembly Of The Main Fuel Gear Pump; A Cylindrical Device With A Tee Handled Adjustment Screw Through Its Axis And Several Protruding Pin Details; Black Oxide Finish, Weight; 2 Lbs; Size, 4 1/4 In. Long X 2 1/2 In. Dia., Used In Conjunction With Pressure Relief Valve Holding Fixture End Item Identification: F100-Pw-100/200/220 | Avl | RFQ |
4933009301858 | 5220-00-930-1858 | Special Features: Tool Steel; 0.375 In. Ht.; 1.000 In. Dia.; 1 Hole Threaded To 0.190-Unc-2A By 0.375 In. Lg. Socket Set Screw, Flat Point; 1 Slide 0.363 In. Dia. By 0.812 In. Lg.; Hardness = Rockwell C63-C66; Used To Measure Lg. Of Shaft Over Bolt Handle Of M2, .50 Cal. Heavy Machine Gun Barrel End Item Identification: Machine Gun, Cal. .50(M2), Nsn 1005-00-322-9715 | Avl | RFQ |
6796937 | 5220-00-320-7292 | Special Features: Gage, Pinion Gear Bushing Concentricity Check End Item Identification: T-56 Turboprop Engine; To 2J-T56-24; Navair 02B-5Da-504 | Avl | RFQ |
6798601 | 5220-00-075-6730 | Special Features: Gage Pin, Turbine | Avl | RFQ |
6798602 | 5220-00-075-6732 | Special Features: Gage Pin, Turbine | Avl | RFQ |
6798603 | 5220-00-075-6731 | Special Features: Gage Pin, Turbine Va | Avl | RFQ |
6798603 | 5220-00-075-6731 | NA | Avl | RFQ |
6798604 | 5220-00-075-6728 | Special Features: Gage Pin, Turbine Va | Avl | RFQ |
6798605 | 5220-00-075-6726 | Special Features: Gage Pin, Turbine Va | Avl | RFQ |
6886197 | 5220-00-264-1978 | NA | Avl | RFQ |
6886200 | 5220-00-264-1980 | NA | Avl | RFQ |
6889201 | 5220-01-052-8014 | Special Features: Gage, Flushpin;Gage Flushpin Finish Grind Model 468 Blank Barrel Type To Check 0.425 In.-0.430 In. Dia. By 38 Degrees Countersink End Item Identification: Engine, Tf-41 | Avl | RFQ |
6898401 | 5220-01-073-1113 | NA | Avl | RFQ |
6898403 | 5220-01-072-0888 | NA | Avl | RFQ |
68D390014-1001 | 5220-01-015-6225 | Special Features: Steel, Passivate Finish, O/A Dim. 0.500 In. Dia., 4.250 In. L, Weight 2 Oz; To 1F-15A-4-6 End Item Identification: Aircraft F/Tf-15A | Avl | RFQ |
6914753 | 5220-01-483-0376 | Special Features: Explosive Ordnance Disposal (Eod) Tools/Equipment End Item Identification: Eod Criticality Code Justification: Feat | Avl | RFQ |
7155674 | 5220-00-890-5115 | End Item Identification: 5220-00-890-5115 Overall Length: 3.000 Inches Nominal | Avl | RFQ |
7304530 | 5220-00-395-4483 | Special Features: Body And Pin Material Steel;Material Hardness Rating Rockwell C 63 To 66;Body Dim 3.875 In Lg, 0.750 In W, 0.750 In H;Pin Dim 6.875 In Lg, 0.125 In Dia Tip End Item Identification: 5220-00-395-4485 | Avl | RFQ |
7304541 | 5220-00-395-4485 | Special Features: Body And Pin Material Steel; Material Hardness Rating Rockwell C 63 To 66; Body Dim. 3.875 In. Lg, 0.750 In. W, 0.750 In. H; Pin Dim. 6.875 In. Lg, 0.125 In. Dia Tip | Avl | RFQ |
7799715 | 5220-00-856-4140 | Special Features: Osteel; 8.2813 In. Lg.; 2.1875 In W.; 2.1563 In. High; 6 Holes Threaded To 0.250-28 Unf-2B; 2 Holes 0.190-32Nf-2B; 2 Slots Are 0.375 In. Lg., 0 .15625 In. W., 1.500 In. Apart; Heat Treat To Rockwell C63-66 Or Equiv. | Avl | RFQ |
7799742 | 5220-00-916-9341 | NA | Avl | RFQ |
7799751 | 5220-00-916-9527 | NA | Avl | RFQ |
7799788 | 5220-00-930-1858 | Special Features: Tool Steel; 0.375 In. Ht.; 1.000 In. Dia.; 1 Hole Threaded To 0.190-Unc-2A By 0.375 In. Lg. Socket Set Screw, Flat Point; 1 Slide 0.363 In. Dia. By 0.812 In. Lg.; Hardness = Rockwell C63-C66; Used To Measure Lg. Of Shaft Over Bolt Handle Of M2, .50 Cal. Heavy Machine Gun Barrel End Item Identification: Machine Gun, Cal. .50(M2), Nsn 1005-00-322-9715 | Avl | RFQ |
8801485 | 5220-01-067-6826 | Special Features: Tool Steel;C63 To C66 Rockwell Hardness Or Equivalent;3.740 In Lg;1 In W;1-1/2 In H;Used For Hand Grenade Gaging End Item Identification: 5220-01-067-6826 | Avl | RFQ |
AT1711 | 5220-00-628-2547 | Special Features: Gage Pin | Avl | RFQ |
CBMG 12 0 N | 5220-01-669-0464 | NA | Avl | RFQ |
CBMG 12 2 N | 5220-01-669-0484 | NA | Avl | RFQ |
CBMG 16 2 N | 5220-01-669-0467 | NA | Avl | RFQ |
CBMG-10-0-N | 5220-01-388-1514 | Special Features: Used To Check Mandrel Wear.Sized To The Minimum Allowable Major Diameter Of The Mandrel. Made From Hardened Steel. Gage Type: Limit Engagement Type: Single | Avl | RFQ |
CBMG-10-1-N | 5220-01-388-1722 | Special Features: Used To Check Mandrel Wear. Sized To The Minimum Allowable Major Diameter Of The Mandrel. Made From Hardened Steel. Gage Type: Limit Engagement Type: Single | Avl | RFQ |
CBMG-10-2-N | 5220-01-388-1740 | Special Features: Used To Check Mandrel Wear. Sized To The Minimum Allowable Major Diameter Of The Mandrel. Made From Hardened Steel. Gage Type: Limit Engagement Type: Single | Avl | RFQ |
CBMG-14-2-N | 5220-01-669-0488 | NA | Avl | RFQ |
CBMG-4-4-N | 5220-01-373-8630 | Gage Type: Limit Engagement Type: Single | Avl | RFQ |
CBMG-6-0-N | 5220-01-373-8631 | Gage Type: Limit Engagement Type: Single | Avl | RFQ |
CBMG-6-1-N | 5220-01-373-8632 | Gage Type: Limit Engagement Type: Single | Avl | RFQ |
CBMG-6-2-N | 5220-01-388-1736 | Gage Type: Limit Engagement Type: Single | Avl | RFQ |
FTMG-586-A-0 | 5220-01-500-5381 | Special Features: Steel Mandrel Gage For 0.3125 In Diameter Hole End Item Identification: C-141 Aircraft Gage Type: Limit | Avl | RFQ |
FTMG-586-B-0 | 5220-01-500-5380 | Special Features: Steel Mandrel Gage For 0.2500 In Diameter Hole End Item Identification: C-141 Aircraft Gage Type: Limit | Avl | RFQ |
FTMG-586-C-0 | 5220-01-500-5600 | Special Features: Steel Mandrel Gage For 0.1875 In Diameter Hole End Item Identification: C-141 Aircraft Gage Type: Limit | Avl | RFQ |
G-314 | 5220-01-480-1650 | NA | Avl | RFQ |
G146155 | 5220-00-233-1751 | NA | Avl | RFQ |
G163517 | 5220-00-127-8927 | NA | Avl | RFQ |
HS7152 | 5220-00-613-8422 | NA | Avl | RFQ |
MSM92XJ | 5220-00-085-8353 | NA | Avl | RFQ |
MSM92XM | 5220-00-085-8365 | NA | Avl | RFQ |
MSM92XR | 5220-00-085-8489 | NA | Avl | RFQ |
PWA24498 | 5220-01-032-9975 | NA | Avl | RFQ |
PWA37123 | 5220-00-299-3973 | Special Features: Steel, C/O Dowel Pin1, Flush Pin 1, Body 1, O/A Dim 3 In. By 3 In. By 1 In.; Weight, 1, 000 Pounds End Item Identification: Turbofan Engine Model Tf30-P-3-7-9 | Avl | RFQ |
PWA37723 | 5220-01-032-8851 | NA | Avl | RFQ |
PWA55149 | 5220-01-284-8475 | Special Features: Btypical Fulsh Pin Type Tool Used Used To Check Concentricity Of Newly Installed Fairing Assembly To Intermediate Case Front Snap Diameter; Matl, Steel; 5 In. Height; 3 1/2 In. Width; Weight, 4 Lbs End Item Identification: F100 Pw100/200/220 Overall Length: 9.000 Inches Nominal | Avl | RFQ |
PWA55756 | 5220-01-140-2131 | Special Features: Material Pes 60 Steel; Dia., 1.0 In.; Weight, 8 Oz; Replacement Flange To Measure Depth Of 30 Degrees Inclusive Hole; Top Of Step Pin To Be Flush With Knurled Housing To 0.008 Step Range End Item Identification: F100-Pw-100/200 Overall Length: 2.200 Inches Nominal | Avl | RFQ |
PWA70797 | 5220-01-448-2346 | Special Features: Gage, Indicator, Flush Pin - 8Th Stage Compressor Stator Segment Assy; Used To Check The Pwa284 Abradable Coating At Final Machining; Consists Of 2 Main Details, Gage Body Containing A Dial Indicator And Setting Master, 2 Spring Loaded Gage Pin Assemblies Of Different Lengths Which Pick Up Two Points On A Conical Plane, 2 Fixture Keys Housed In Base Leg Of L-Shaped Master Body; Dim: 5.0 X 9.0 In End Item Identification: F100-Pw-229 Supplementary Features: Serd 6992 | Avl | RFQ |
PWA70799 | 5220-01-448-2348 | Special Features: Gage, Indicator, Flush Pin - 9Th Stage Compressor Stator Segment Assy; Used To Check The Pwa284 Abradable Coating At Final Machining; Consists Of 2 Main Details, Gage Body Containing A Dial Indicator And Setting Master, 2 Spring Loaded Gage Pin Assemblies Of Different Lengths Which Pick Up Two Points On A Conical Plane, 2 Fixture Keys Housed In Base Leg Of L-Shaped Master Body; Dim: 5.0 X 9.0 In End Item Identification: F100-Pw-229 Supplementary Features: Serd 6994 | Avl | RFQ |
PWA71012 | 5220-01-386-2007 | Special Features: Required To Inspect Rear Outer Surface During Finish Machining Operation After Plasma Spray;Gage Will Check The 0.475/0.469 Drop Dimension While Part Is Fixtured;Serd 7074 End Item Identification: F100-Pw-229 Gage Type: Limit | Avl | RFQ |
PWA71018 | 5220-01-386-2010 | Special Features: Required To Check 3Rd Stage Compressor Stator Dimension To Inner Platform Trailing Edge Surface;1.786/1.782 Dimension;Gage May Also Be Used To Inspect Depth Of Wear Prior To Repair;Serd7080 End Item Identification: F100-Pw-229 Gage Type: Limit | Avl | RFQ |
PWA71019 | 5220-01-386-2038 | Special Features: Serd 7081;1.0 In. Wd By 0.8 In. Ht;6.0 Lbs;Locates Support Surface Of Pwa71014 Machine Fixture To Measure Stator Dimension 0.302/0.298 To Anti-Rotation Flange Front Outer Face, After Plasma Spray;Also Inspects Wear Depth;C/Otool Steel Bar W/Indicator, Holder And Container;Rqrd For Inspection W/Plasmaspray Repair Of 3Rd Stage Compressor Stator Anti-Rotation Flange Face End Item Identification: F100-Pw-229 Overall Length: 28.000 Inches Nominal | Avl | RFQ |
PWA71020 | 5220-01-386-2012 | Special Features: Required To Check 3Rd Stage Compressor Stator Dimension To Anti-Rotation Flange Front Inner Face;0.350/0.340 Dimension;Gage May Also Be Used To Inspect Depth Of Wear Prior To Repair;Serd 7082 End Item Identification: F100-Pw-229 Gage Type: Limit | Avl | RFQ |
PWA71024 | 5220-01-386-8836 | Special Features: 28.0 In. Lg By 1.0 In. Wd By 0.8 In. Ht;Used W/Pwa71014 Machine Fixture;Engine Part Supported 4075983;Rqrd For Pre-Inspection Procedures Assoc W/Plasma Spray Repair Of 3Rd Stage Compressor Stator Anti-Rotation Flange Face;C/O Tool Steel Bar W/Indicator, Holder And Container;Serd 7086 End Item Identification: F100-Pw-229 Gage Type: Limit | Avl | RFQ |
PWA71149 | 5220-01-434-3204 | Special Features: Gage, Flush Pin;Pwa71149 Gage, Consists Of Rect. Steel Body W/Dowel Pin Into Body At Each End, Gage Block Doweled & Screwed To Center Of Body That Houses Aisi A2 Flush Pin Which Fits Into Diam. Of Gage Block & Has Cont. Travel Within Block, Notch On O.D. Of Fl Pin Capt. By Dowel Press Thru Gage Block To Ctrl Trav. Dist. Of Pin;Flush Pin End Must Be Flush To Gage Block If Tube Is In Ass. Position;9.0 In. L;2.0 In. W;0.5 In. H;3.0 Lb;Serd 7265 End Item Identification: F100-Pw-229 | Avl | RFQ |
PWA71150 | 5220-01-434-0007 | Special Features: Gage, Flush Pin;Rect. W/Dowel Pin Into Each End;Jointly Locates Gage Body Against I.D. And Top Face Of Inner Case Shroud;Sq. Slot In Top Face Houses Sq. Flush Pin That Slides In Sq. Slot;9.0 In. L;2.0 In.W;2.5 In. H;3.0 Lbs;Serd 7266, F33657-94-C-0031 End Item Identification: F100-Pw-229 | Avl | RFQ |
PWA71514 | 5220-01-448-2350 | Special Features: Gage, Indicator, Flush Pin - 12Th Stage Compressor Stator Segment Assy; Used To Check The Pwa284 Abradable Coatings At Final Machining; Consists Of 2 Main Details, Gage Body Containing A Dial Indicator And Setting Master, 2 Spring Loaded Gage Pin Assemblies Of Different Lengths Which Pick Up Two Poins On A Conical Plane, 2 Fixture Keys Housed In Base Leg Of L-Shaped Master Body; Dim: 4.5 X 9.0 In End Item Identification: F100-Pw-229 Supplementary Features: Serd 7850 | Avl | RFQ |
PWA71515 | 5220-01-448-2344 | Special Features: Gage, Indicator, Flush Pin - 11Th Stage Compressor Stator Segment Assembly;Used To Check The Pwa284 Abradable Coating At Final Machining; Consists Of 2 Main Details, Gage Body Containing A Dial Indicator And Setting Master, 2 Spring Loaded Gage Pin Assemblies Of Different Lengths Which Pick Up Two Points On A Conical Plane, 2 Fixture Keys Housed In Base Leg Of L-Shaped Master Body; Dim: 6.62 X 9.0 In End Item Identification: F100-Pw-229 Supplementary Features: Serd 7851 | Avl | RFQ |
PWA71867 | 5220-01-472-4537 | Special Features: This Gage Will Be Used To Verify That Gage Point At 35.696 Inch Diameter And 3.424 Inch Height; Engagement Height Is 4.880 Inches Engagement Location: Top Of Pwa71860 Or Pwa71861 | Avl | RFQ |
PWA72023 | 5220-01-470-0556 | Special Features: Pwa72023 Gage Measures Finish Diameter 1.912 + .002 Inch Distance From Boss Surface B To Repair Flange Face Surface L Gage Type: Combination Go Not Go Overall Length: 5.250 Inches Nominal | Avl | RFQ |
PWA72065 | 5220-01-572-9200 | Special Features: Serd Number 8654 End Item Identification: F-16 Aircraft Part Name Assigned By Controlling Agency: Gage, Flush | Avl | RFQ |
PWA72066 | 5220-01-466-2968 | Special Features: This Nsn Is Required To Dimensionally Bench Inspect The 1St Stage Turbine Stator Support Prior To Or After Repair Of The Outer Diameter Flange Surface L To Z. Gage Measures Finish Dim. 1.912 +.002 Inch Distance From Boss Surface B To Repair Flange Face Surface L. End Item Identification: F100 Pw229, Weapon System Designator Code 21, Aircraft, Freedom Fighter F-5 | Avl | RFQ |
PWA72162 | 5220-01-467-0639 | Special Features: This Nsn Will Be Used To Verify The 0.107 - 0.117 Gage Point On The 9 Degree Conical Surface End Item Identification: Weapon System Designator Code 21, Freedom Fighter F-5, Aircraft | Avl | RFQ |
PWA72172 | 5220-01-470-1386 | Special Features: Gage Will Be Used To Verify The 0.364 Radial Diameter To P/P Plane-B- End Item Identification: 6635-01-378-4011; Weapon Systems Designator Code 21, Aircraft, Freedom Fighter F-5 | Avl | RFQ |
PWA72269 | 5220-01-467-2169 | Special Features: This Nsn Is Used To Check 1.122 - 1.128 Dimension During The Maching Of P/P Surface -S- End Item Identification: Weapon System Designator Code 21, Freedom Fighter F-5, Aircraft, 1730-01-114-4662 | Avl | RFQ |
PWA72701 | 5220-01-499-6923 | NA | Avl | RFQ |
PWA72703 | 5220-01-498-2979 | NA | Avl | RFQ |
PWA83167 | 5220-01-378-6105 | Special Features: Rqrd To Properly Locate Cooling Air Duct Manifold Relative To Front Flange Of Low Pressure Turbine;C/O Gage Body, Three Clamp Assemblies, Two Locating Pins And Two Stepped Flush Pins;Matl Steel;Clamps Attach Gage To Front Face Of Low Pressure Turbine Flange;Locating Pins Psition Gage;Flush Pins Bear Against Cooling Air Manifold;Position Of Stepped Surfaces Relative To Gage Body Determine If Manifold Properly Located;Plastic Container Is Provided For Storage;Serd No. 0336 | Avl | RFQ |
PWA83169 | 5220-01-380-4625 | Special Features: Rqrd To Check Location Of Cooling Air Supply Connector Of Active Clearance Control Relative To Low Pressure Turbine While Turbine Is On Storage Stand;C/O Steel Base Plate, Gage Block, Two Locating Pins And Three Locating Shoulder Bolts;Pins And Bolts Position Base Plate Against N Flange Of Low Pressure Turbine;Gage Checks Distance Between Base Plate And Connector At Two Locations;Serd No. 0338 | Avl | RFQ |
RE 168230021-128 | 5220-01-388-1514 | Special Features: Used To Check Mandrel Wear.Sized To The Minimum Allowable Major Diameter Of The Mandrel. Made From Hardened Steel. Gage Type: Limit Engagement Type: Single | Avl | RFQ |
RE168230021-121 | 5220-01-388-1736 | Gage Type: Limit Engagement Type: Single | Avl | RFQ |
RE168230021-136 | 5220-01-388-1722 | Special Features: Used To Check Mandrel Wear. Sized To The Minimum Allowable Major Diameter Of The Mandrel. Made From Hardened Steel. Gage Type: Limit Engagement Type: Single | Avl | RFQ |
RE168230021-143 | 5220-01-388-1740 | Special Features: Used To Check Mandrel Wear. Sized To The Minimum Allowable Major Diameter Of The Mandrel. Made From Hardened Steel. Gage Type: Limit Engagement Type: Single | Avl | RFQ |
RE168230024-117 | 5220-01-373-8631 | Gage Type: Limit Engagement Type: Single | Avl | RFQ |
RE168230024-125 | 5220-01-373-8632 | Gage Type: Limit Engagement Type: Single | Avl | RFQ |
RE16823004-106 | 5220-01-373-8630 | Gage Type: Limit Engagement Type: Single | Avl | RFQ |
STD63778 | 5220-00-632-3522 | NA | Avl | RFQ |
T004A301-01 | 5220-01-144-1389 | Special Features: Used To Measure The Depth Of The Cover On Gyroscopes 6615-01-047-7461 And 6615-01-047-7462; Stainless Steel; Weight, 1.0 Lb; Width, 4.0 In; Height, 2.0 In; Dia., 1.0 In. | Avl | RFQ |
TLG5101-1-12 | 5220-00-064-0827 | NA | Avl | RFQ |
TLG5101-3-12 | 5220-00-064-0835 | NA | Avl | RFQ |
TLG5101-4-12 | 5220-00-064-0837 | NA | Avl | RFQ |
U6629 | 5220-01-011-2828 | Special Features: Gage, Pin End Item Identification: J85-Ge-21 Engine | Avl | RFQ |
U6649 | 5220-01-011-2829 | Special Features: Gage, Flush Pin End Item Identification: J85-Ge-21 Engine | Avl | RFQ |
U7430 | 5220-01-011-2828 | Special Features: Gage, Pin End Item Identification: J85-Ge-21 Engine | Avl | RFQ |
W67-16-4 | 5220-00-960-7952 | Special Features: Gage, Flush Pin | Avl | RFQ |
WCIS-WG-10-0-N | 5220-01-388-1514 | Special Features: Used To Check Mandrel Wear.Sized To The Minimum Allowable Major Diameter Of The Mandrel. Made From Hardened Steel. Gage Type: Limit Engagement Type: Single | Avl | RFQ |
WCIS-WG-10-1-N | 5220-01-388-1722 | Special Features: Used To Check Mandrel Wear. Sized To The Minimum Allowable Major Diameter Of The Mandrel. Made From Hardened Steel. Gage Type: Limit Engagement Type: Single | Avl | RFQ |
WCIS-WG-10-2-N | 5220-01-388-1740 | Special Features: Used To Check Mandrel Wear. Sized To The Minimum Allowable Major Diameter Of The Mandrel. Made From Hardened Steel. Gage Type: Limit Engagement Type: Single | Avl | RFQ |
WCIS-WG-6-2-N | 5220-01-388-1736 | Gage Type: Limit Engagement Type: Single | Avl | RFQ |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.
Request for Quote