ASAP Part Services, owned and operated by ASAP Semiconductor, has over 6 billion parts inventoried. This includes new, old, used, and obsolete parts, such as 540-011-019-9, 540-011-019-7, 540-011-019-5, 540-011-019-3, 540-011-019-15. As an ISO 9001:2015 certified and FAA AC 00-56B accredited company, we go to great lengths to ensure we are delivering quality parts. We partner exclusively with reliable manufacturers such as Bell Helicopter Textron Inc, Lockheed Martin Corporation, Sikorsky Aircraft Corporation. Our team provides superior quality assurance testing for General Characteristics Item Description: Tungsten alloy, mallory 1000, P.R. mallory co, ind or densalloy 170 or 180POWDER alloys corp, clifton, nj, or fansteel 77 fansteel metallurgical corpchicago, ill, dim., 3.180 in. nom lg, 1.500 in. nom W, 1.000 in. nom thick, twoholes 0.208 in. min, 0.214 in. max dia drilled thru 0.450 in. either side ofvertical centerline and 0.480 in. from bottom, one hole 0.208 in. min, 0.214IN. max dia drilled thru on vertical centerline 2.830 in. from bottomcorners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in. deep by 40DEG on top, top hole counterbored 0.377 in. dia by 0.900 in. deep, top widthbeveled by 45 deg angle, General Characteristics Item Description: Steel, MIL-S-18729 comp 4130 cond a or MIL-S-5626 comp 4140 cond D1 ORMIL-S-5000 comp 4340 cond C1, cadmium-plated QQ-P-416 class 2 type 2, dim., 3.180 in. nom lg, 1.500 in. nom W, 0.250 in. nom thick, two holes 0.210 in. diadrilled thru 0.450 in. either side of vertical centerline and 0.480 in. frombottom, one hole 0.216 in. dia drilled thru on vertical centerline 2.830 in.from bottom, corners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in.deep by 40 deg on top, top hole counterbored 0.377 in. dia by 0.150 in. deeptop width beveled by 45 deg angle, General Characteristics Item Description: Steel, MIL-S-18729 comp 4130 cond a or MIL-S-5626 comp 4140 cond D1 ORMIL-S-5000 comp 4340 cond C1, cadmium-plated QQ-P-416 class 2 type 2, dim., 3.180 in. nom lg, 1.500 in. nom W, 0.500 in. nom thick, two holes 0.210 in. diadrilled thru 0.450 in. either side of vertical centerline and 0.480 in. frombottom, one hole 0.216 in. dia drilled thru on vertical centerline 2.830 in.from bottom, corners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 indeep by 40 deg on top, top hole counterbored 0.377 in. dia by 0.400 in. deeptop width beveled by 45 deg angle, General Characteristics Item Description: Steel, MIL-S-18729 comp 4130 cond a or MIL-S-5626 comp 4140 cond D1 or MIL-S-5000 comp 4340 cond C1, cadmium- plated QQ-P-416 class 2 type 2, dim., 3.180 in. nom lg, 1.500 in. nom W, 0.750IN. nom thick, two holes 0.210 in. nom dia drilled thru 0.480 in. from BOTTOM0.450 in. either side of vertical centerline, one hole 0.210 in. dia drilled thru 0.250 in. from top on vertical centerline and counterbored 0.377 in. dia by 0.650 in. deep, top left and right corners cut 0.280 in. deep by 40 deg, bottom left and right corners cut 0.250 in. deep by 25 deg, top cut at 45 deg angle across thickness, General Characteristics Item Description: Tungston alloy, mallory 1000, P.R. mallory co, ind or densalloy 170 or 180POWDER alloys corp, clifton nj or fansteel 77, fansteel metallurgical corpchicago, ill, dim., 3.180 in. nom lg, 1.500 in. nom W, 0.190 in. nom thick, twoholes 0.208 in. min, 0.214 in. max dia drilled thru 0.450 in. either side ofvertical centerline and 0.480 in. from bottom, one hole 0.208 in. min, 0.214IN. max dia drilled thru on vertical centerline 2.830 in. from bottomcorners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in. deep by 40DEG on top and more. So if you are in need of Weight Rotary Wing Blade or any other NSN parts, submit an Instant RFQ and receive a quote in as little as 15 minutes.
| Manufacturers for Weight Rotary Wing Blade | |||
|---|---|---|---|
| bell helicopter textron inc | lockheed martin corporation | ||
| sikorsky aircraft corporation | |||
| Part Number | NSN | Details | QTY | RFQ |
|---|---|---|---|---|
| 540-011-019-9 | 1615-00-495-6560 | general characteristics item description: tungsten alloy, mallory 1000, p.r. mallory co, ind or densalloy 170 or 180powder alloys corp, clifton, nj, or fansteel 77 fansteel metallurgical corpchicago, ill, dim., 3.180 in. nom lg, 1.500 in. nom w, 1.000 in. nom thick, twoholes 0.208 in. min, 0.214 in. max dia drilled thru 0.450 in. either side ofvertical centerline and 0.480 in. from bottom, one hole 0.208 in. min, 0.214in. max dia drilled thru on vertical centerline 2.830 in. from bottomcorners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in. deep by 40deg on top, top hole counterbored 0.377 in. dia by 0.900 in. deep, top widthbeveled by 45 deg angle | Avl | RFQ |
| 540-011-019-7 | 1615-00-495-6569 | general characteristics item description: steel, mil-s-18729 comp 4130 cond a or mil-s-5626 comp 4140 cond d1 ormil-s-5000 comp 4340 cond c1, cadmium-plated qq-p-416 class 2 type 2, dim., 3.180 in. nom lg, 1.500 in. nom w, 0.250 in. nom thick, two holes 0.210 in. diadrilled thru 0.450 in. either side of vertical centerline and 0.480 in. frombottom, one hole 0.216 in. dia drilled thru on vertical centerline 2.830 in.from bottom, corners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in.deep by 40 deg on top, top hole counterbored 0.377 in. dia by 0.150 in. deeptop width beveled by 45 deg angle | Avl | RFQ |
| 540-011-019-5 | 1615-00-495-6568 | general characteristics item description: steel, mil-s-18729 comp 4130 cond a or mil-s-5626 comp 4140 cond d1 ormil-s-5000 comp 4340 cond c1, cadmium-plated qq-p-416 class 2 type 2, dim., 3.180 in. nom lg, 1.500 in. nom w, 0.500 in. nom thick, two holes 0.210 in. diadrilled thru 0.450 in. either side of vertical centerline and 0.480 in. frombottom, one hole 0.216 in. dia drilled thru on vertical centerline 2.830 in.from bottom, corners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 indeep by 40 deg on top, top hole counterbored 0.377 in. dia by 0.400 in. deeptop width beveled by 45 deg angle | Avl | RFQ |
| 540-011-019-3 | 1615-00-495-6565 | general characteristics item description: steel, mil-s-18729 comp 4130 cond a or mil-s-5626 comp 4140 cond d1 or mil-s-5000 comp 4340 cond c1, cadmium- plated qq-p-416 class 2 type 2, dim., 3.180 in. nom lg, 1.500 in. nom w, 0.750in. nom thick, two holes 0.210 in. nom dia drilled thru 0.480 in. from bottom0.450 in. either side of vertical centerline, one hole 0.210 in. dia drilled thru 0.250 in. from top on vertical centerline and counterbored 0.377 in. dia by 0.650 in. deep, top left and right corners cut 0.280 in. deep by 40 deg, bottom left and right corners cut 0.250 in. deep by 25 deg, top cut at 45 deg angle across thickness | Avl | RFQ |
| 540-011-019-15 | 1615-00-495-6574 | general characteristics item description: tungston alloy, mallory 1000, p.r. mallory co, ind or densalloy 170 or 180powder alloys corp, clifton nj or fansteel 77, fansteel metallurgical corpchicago, ill, dim., 3.180 in. nom lg, 1.500 in. nom w, 0.190 in. nom thick, twoholes 0.208 in. min, 0.214 in. max dia drilled thru 0.450 in. either side ofvertical centerline and 0.480 in. from bottom, one hole 0.208 in. min, 0.214in. max dia drilled thru on vertical centerline 2.830 in. from bottomcorners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in. deep by 40deg on top | Avl | RFQ |
| 540-011-019-13 | 1615-00-495-6572 | general characteristics item description: tungsten alloy, mallory 1000, p.r.mallory co, ind or densalloy 170 or 180powder alloys corp, clifton, nj or fansteel 77, fansteel metallurgical corpchicago, ill, dim., 3.180 in. nom lg, 1.500 in. nom w, 0.090 in. nom thick, twoholes 0.208 in. min, 0.214 in. max dia drilled thru 0.450 in either side ofvertical centerline and 0.480 in. from bottom, one hole 0.208 in. min, 0.214in. max dia drilled thru on vertical centerline 2.830 in. from bottomcorners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in. deep by 40deg on top | Avl | RFQ |
| 540-011-019-11 | 1615-00-495-6571 | general characteristics item description: tungsten alloy, mallory 1000, p.r. mallory co, ind or densalloy 170 or 180powder alloys corp, clifton, nj or fansteel 77, fansteel metallurgical corpchicago, ill, dim., 3.180 in. nom lg, 1.500 in. nom w, 0.500 in. nom thick, twoholes 0.208 in. min, 0.214 in. max dia drilled thru 0.450 in. either side ofvertical centerline and 0.480 in. from bottom, one hole 0.208 in. min, 0.214in. max dia drilled thru on vertical centerline 2.830 in. from bottomcorners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in. deep by 40deg on top, top hole counterbored 0.377 in. dia by 0.400 in. deep, top widthbeveled by 45 deg angle | Avl | RFQ |
| 540-011-019-1 | 1615-00-495-6563 | general characteristics item description: steel, mil-s-18729 comp 4130 cond a or mil-s-5626 comp 4140 cond d1 or mil-s-5000 comp 4340 cond c1, cadmium- plated qq-p-416 class 2 type 2, dim., 3.180 in. nom lg, 1.500 in. nom w, 1.000in. nom thick, two holes 0.210 in. nom dia drilled thru 0.480 in. from bottom0.450 in. either side of vertical centerline, one hole 0.210 in. dia drilled thru 0.250 in. from top on vertical centerline and counterbored 0.377 in. dia by 0.900 in. deep, top left and right corners cut 0.250 in. deep by 40 deg, bottom left and right corners cut 0.250 in. deep by 25 deg, top cut at 45 deg angle across thickness | Avl | RFQ |
| 540-011-019-001 | 1615-00-495-6563 | general characteristics item description: steel, mil-s-18729 comp 4130 cond a or mil-s-5626 comp 4140 cond d1 or mil-s-5000 comp 4340 cond c1, cadmium- plated qq-p-416 class 2 type 2, dim., 3.180 in. nom lg, 1.500 in. nom w, 1.000in. nom thick, two holes 0.210 in. nom dia drilled thru 0.480 in. from bottom0.450 in. either side of vertical centerline, one hole 0.210 in. dia drilled thru 0.250 in. from top on vertical centerline and counterbored 0.377 in. dia by 0.900 in. deep, top left and right corners cut 0.250 in. deep by 40 deg, bottom left and right corners cut 0.250 in. deep by 25 deg, top cut at 45 deg angle across thickness | Avl | RFQ |
| 540-011-019 | 1615-00-495-6565 | general characteristics item description: tungsten alloy, mallory 1000, p.r.mallory co, ind or densalloy 170 or 180powder alloys corp, clifton, nj or fansteel 77, fansteel metallurgical corpchicago, ill, dim., 3.180 in. nom lg, 1.500 in. nom w, 0.090 in. nom thick, twoholes 0.208 in. min, 0.214 in. max dia drilled thru 0.450 in either side ofvertical centerline and 0.480 in. from bottom, one hole 0.208 in. min, 0.214in. max dia drilled thru on vertical centerline 2.830 in. from bottomcorners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in. deep by 40deg on top | Avl | RFQ |
| 540-011-019 | 1615-00-495-6572 | general characteristics item description: tungsten alloy, mallory 1000, p.r.mallory co, ind or densalloy 170 or 180powder alloys corp, clifton, nj or fansteel 77, fansteel metallurgical corpchicago, ill, dim., 3.180 in. nom lg, 1.500 in. nom w, 0.090 in. nom thick, twoholes 0.208 in. min, 0.214 in. max dia drilled thru 0.450 in either side ofvertical centerline and 0.480 in. from bottom, one hole 0.208 in. min, 0.214in. max dia drilled thru on vertical centerline 2.830 in. from bottomcorners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in. deep by 40deg on top | Avl | RFQ |
| 540-011-019 | 1615-00-495-6571 | general characteristics item description: tungsten alloy, mallory 1000, p.r.mallory co, ind or densalloy 170 or 180powder alloys corp, clifton, nj or fansteel 77, fansteel metallurgical corpchicago, ill, dim., 3.180 in. nom lg, 1.500 in. nom w, 0.090 in. nom thick, twoholes 0.208 in. min, 0.214 in. max dia drilled thru 0.450 in either side ofvertical centerline and 0.480 in. from bottom, one hole 0.208 in. min, 0.214in. max dia drilled thru on vertical centerline 2.830 in. from bottomcorners chamfered 0.250 in. deep by 25 deg on bottom, 0.250 in. deep by 40deg on top | Avl | RFQ |
| 540-011-018-1 | 1615-00-495-6557 | general characteristics item description: lead, qq-l-201 grade d, dim., 2.300 in. nom lg, 1.600 in. nom width at oneend w/corners rounded by 0.250 in. radius, opposite end rounded w/0.440 in.radius, 0.125 in. nom thick, two mounting holes 0.343 in. dia located onvertical centerline 0.400 and 1.500 from 1.600 in. wide end, max surfacefinish, all surfaces 125 microinches aa | Avl | RFQ |
| 47-110-371-5 | 1615-00-626-8407 | NA | Avl | RFQ |
| 47-110-371-3 | 1615-00-626-8406 | NA | Avl | RFQ |
| 47-110-371-1 | 1615-00-626-8405 | NA | Avl | RFQ |
| 206-010-238-9 | 1615-00-121-6542 | general characteristics item description: aluminum alloy qq-a-250/4 comp 2024-t3, dim., 7.000 in. nom lg, 1.200 in. nom w, 0.016 in. nom thick, two holes 0.260 in. min, 0.266 in. max dia drilled thru on horizontal centerline 1.200 in. from each end w/4.600 in. center to center distance, all corners chamfered 0.250 in. deep by 45 deg, maxsurface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 206-010-238-7 | 1615-00-121-6534 | general characteristics item description: cres, mil-s-5059 comp 18-8 type 301 1/4 hard, passivated, fw4007 bell helicopter co, dim., 7.000 in. nom lg, 1.200 in. nom w, 0.016 in. nom thick, two holes 0.260 in. min, 0.266 in. max dia drilled thru on horizontal centerline 1.200 in. from each end w/4.600 in. center to center distance, all corners chamfered 0.250 in. deep by 45 deg, max surface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 206-010-238-5 | 1615-00-121-6532 | general characteristics item description: cres, mil-s-5059 comp 18-8 type 301 1/4 hard, passivated, fw4007 bell helicopter co, dim., 7.000 in. nom lg, 1.200 in. nom w, 0.032 in. nom thick, two holes 0.260 in. min, 0.266 in. max dia drilled thru on horizontal centerline 1.200 in. from each end w/4.600 in. center to center distance, all corners chamfered 0.250 in. deep by 45 deg, max surface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 206-010-238-3 | 1615-00-121-6499 | general characteristics item description: cres, mil-s-5059 comp 18-8 type 301 1/4 hard, passivated, fw4007 bell helicopter co, dim., 7.000 in. nom lg, 1.200 in. nom w, 0.063 in. nom thick, two holes 0.260 in. min, 0.266 in. max dia drilled thru on horizontal centerline 1.200 in. from each end w/4.600 in. center to center distance, all corners chamfered 0.250 in. deep by 45 deg, max surface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 206-010-238-1 | 1615-00-121-6469 | NA | Avl | RFQ |
| 206-010-238-001 | 1615-00-121-6469 | NA | Avl | RFQ |
| 204-012-027-9 | 1615-00-497-1966 | general characteristics item description: steel, cadmium-plated qq-p-416 class 2 type 2, dim., 3.100 in. nom lg1.600 in. nom w, 0.750 in. nom thick, two holes 0.210 in. dia drilled thru0.425 in. either side of vertical centerline and 0.520 in. from bottom, onehole 0.210 in. dia drilled thru on vertical centerline 2.270 in. from bottomholes counterbored 0.500 in. dia by 0.625 in. deep, width beveled on top by52 deg angle, corners chamfered 0.190 in. deep by 0.630 in. lg on bottom, 0.250 in. deep by 45 deg on top, max surface finish, all surfaces 125microinches aa | Avl | RFQ |
| 204-012-027-7 | 1615-00-497-1965 | general characteristics item description: steel, cadmium-plated qq-p-416 class 2 type 2, dim., 3.100 in. nom lg1.600 in. nom w, 0.625 in. nom thick, two holes 0.210 in. dia drilled thru0.425 in. either side of vertical centerline and 0.520 in. from bottom, onehole 0.210 in. dia drilled thru on vertical centerline 2.270 in. from bottomholes counterbored to 0.500 in. dia by 0.500 in. deep, width beveled on topby 52 deg angle, corners chamfered 0.190 in. deep by 0.630 in. lg on bottom0.250 in. deep by 45 deg on top, max surface finish, all surfaces 125microinches aa | Avl | RFQ |
| 204-012-027-5 | 1615-00-497-1964 | general characteristics item description: steel, cadmium-plated qq-p-416 class 2 type 2, dim., 3.100 in. nom lg, 1.600 in. nom w, 0.375 in. nom thick, two holes 0.210 in. dia drilled thru0.425 in. either side of vertical centerline and 0.520 in. from bottom, onehole 0.210 in. dia drilled thru on vertical centerline 2.270 in. from bottomholes counterbored 0.500 in. dia by 0.250 in. deep, width beveled on top by52 deg angle, corners chamfered 0.190 in. deep by 0.630 in. lg on bottom, 0.250 in. deep by 45 deg on top, max surface finish, all surfaces 125microinches aa | Avl | RFQ |
| 204-012-027-3 | 1615-00-497-1963 | general characteristics item description: steel, cadmium-plated qq-p-416 class 2 type 2, dim., 3.100 in. nom lg, 1.600 in. nom w, 0.190 in. nom thick, two holes 0.210 in. dia drilled thru0.425 in. either side of vertical centerline and 0.520 in. from bottom, onehole 0.210 in. dia drilled thru on vertical centerline 2.270 in. from bottomholes counterbored 0.500 in. dia by 0.065 in. deep, width beveled on top by52 deg angle, corners chamfered 0.190 in. deep by 0.630 in. lg on bottom0.250 in. deep by 45 deg on top, max surface finish, all surfaces 125microinches aa | Avl | RFQ |
| 204-012-027-21 | 1615-00-497-1969 | general characteristics item description: cres, mil-s-5059 comp 302 annealed, dim., 3.100 in. nom lg, 1.600 in. nom w0.125 in. nom thick, two holes 0.210 in. dia drilled thru 0.425 in. eitherside of vertical centerline and 0.520 in. from bottom, one hole 0.210 in. diadrilled thru on vertical centerline and 2.270 in. from bottom, cornerschamfered 0.190 in. lg by 0.630 in. w on bottom, 0.250 in. lg by 45 deg ontop, max surface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 204-012-027-19 | 1615-00-497-1968 | general characteristics item description: cres, mil-s-5059 comp 302 annealed, dim., 3.100 in. nom lg, 1.600 in. nom w0.063 in. nom thick, two holes 0.210 in. dia drilled thru 0.425 in. eitherside of vertical centerline and 0.520 in. from bottom, one hole 0.210 in. diadrilled thru on vertical centerline and 2.270 in. from bottom, cornerschamfered 0.190 in. lg by 0.630 in. w on bottom, 0.250 in. lg by 45 deg on top, max surface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 204-012-027-11 | 1615-00-497-1967 | general characteristics item description: steel, cadmium-plated qq-p-416 class 2 type 2, dim., 3.100 in. nom lg1.600 in. nom w, 1.000 in. nom thick, two holes 0.210 in. dia drilled thru0.425 in. either side of vertical centerline and 0.520 in. from bottom, onehole 0.210 in. dia drilled thru on vertical centerline 2.270 in. from bottomholes counterbored to 0.500 in. dia by 0.875 in. deep, width beveled on topby 52 deg angle, corners chamfered 0.190 in. deep by 0.630 in. lg on bottom0.250 in. deep by 45 deg on top, max surface finish, all surfaces 125microinches aa | Avl | RFQ |
| 204-012-027-1 | 1615-00-497-1962 | general characteristics item description: cres, mil-s-5059 comp 302 annealed, dim., 3.100 in. nom lg, 1.600 in. nom w0.020 in. nom thick, two holes 0.210 in. dia drilled thru 0.425 in. eitherside of vertical centerline and 0.520 in. from bottom, one hole 0.210 in. diadrilled thru on vertical centerline and 2.270 in. from bottom, cornerschamfered 0.190 in. lg by 0.630 in. w on bottom, 0.250 in. lg by 45 deg on top, max surface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 204-012-027-021 | 1615-00-497-1969 | general characteristics item description: cres, mil-s-5059 comp 302 annealed, dim., 3.100 in. nom lg, 1.600 in. nom w0.125 in. nom thick, two holes 0.210 in. dia drilled thru 0.425 in. eitherside of vertical centerline and 0.520 in. from bottom, one hole 0.210 in. diadrilled thru on vertical centerline and 2.270 in. from bottom, cornerschamfered 0.190 in. lg by 0.630 in. w on bottom, 0.250 in. lg by 45 deg ontop, max surface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 204-012-027-019 | 1615-00-497-1968 | general characteristics item description: cres, mil-s-5059 comp 302 annealed, dim., 3.100 in. nom lg, 1.600 in. nom w0.063 in. nom thick, two holes 0.210 in. dia drilled thru 0.425 in. eitherside of vertical centerline and 0.520 in. from bottom, one hole 0.210 in. diadrilled thru on vertical centerline and 2.270 in. from bottom, cornerschamfered 0.190 in. lg by 0.630 in. w on bottom, 0.250 in. lg by 45 deg on top, max surface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 204-012-027-011 | 1615-00-497-1967 | general characteristics item description: steel, cadmium-plated qq-p-416 class 2 type 2, dim., 3.100 in. nom lg1.600 in. nom w, 1.000 in. nom thick, two holes 0.210 in. dia drilled thru0.425 in. either side of vertical centerline and 0.520 in. from bottom, onehole 0.210 in. dia drilled thru on vertical centerline 2.270 in. from bottomholes counterbored to 0.500 in. dia by 0.875 in. deep, width beveled on topby 52 deg angle, corners chamfered 0.190 in. deep by 0.630 in. lg on bottom0.250 in. deep by 45 deg on top, max surface finish, all surfaces 125microinches aa | Avl | RFQ |
| 204-012-027-009 | 1615-00-497-1966 | general characteristics item description: steel, cadmium-plated qq-p-416 class 2 type 2, dim., 3.100 in. nom lg1.600 in. nom w, 0.750 in. nom thick, two holes 0.210 in. dia drilled thru0.425 in. either side of vertical centerline and 0.520 in. from bottom, onehole 0.210 in. dia drilled thru on vertical centerline 2.270 in. from bottomholes counterbored 0.500 in. dia by 0.625 in. deep, width beveled on top by52 deg angle, corners chamfered 0.190 in. deep by 0.630 in. lg on bottom, 0.250 in. deep by 45 deg on top, max surface finish, all surfaces 125microinches aa | Avl | RFQ |
| 204-012-027-007 | 1615-00-497-1965 | general characteristics item description: steel, cadmium-plated qq-p-416 class 2 type 2, dim., 3.100 in. nom lg1.600 in. nom w, 0.625 in. nom thick, two holes 0.210 in. dia drilled thru0.425 in. either side of vertical centerline and 0.520 in. from bottom, onehole 0.210 in. dia drilled thru on vertical centerline 2.270 in. from bottomholes counterbored to 0.500 in. dia by 0.500 in. deep, width beveled on topby 52 deg angle, corners chamfered 0.190 in. deep by 0.630 in. lg on bottom0.250 in. deep by 45 deg on top, max surface finish, all surfaces 125microinches aa | Avl | RFQ |
| 204-012-027-005 | 1615-00-497-1964 | general characteristics item description: steel, cadmium-plated qq-p-416 class 2 type 2, dim., 3.100 in. nom lg, 1.600 in. nom w, 0.375 in. nom thick, two holes 0.210 in. dia drilled thru0.425 in. either side of vertical centerline and 0.520 in. from bottom, onehole 0.210 in. dia drilled thru on vertical centerline 2.270 in. from bottomholes counterbored 0.500 in. dia by 0.250 in. deep, width beveled on top by52 deg angle, corners chamfered 0.190 in. deep by 0.630 in. lg on bottom, 0.250 in. deep by 45 deg on top, max surface finish, all surfaces 125microinches aa | Avl | RFQ |
| 204-012-027-003 | 1615-00-497-1963 | general characteristics item description: steel, cadmium-plated qq-p-416 class 2 type 2, dim., 3.100 in. nom lg, 1.600 in. nom w, 0.190 in. nom thick, two holes 0.210 in. dia drilled thru0.425 in. either side of vertical centerline and 0.520 in. from bottom, onehole 0.210 in. dia drilled thru on vertical centerline 2.270 in. from bottomholes counterbored 0.500 in. dia by 0.065 in. deep, width beveled on top by52 deg angle, corners chamfered 0.190 in. deep by 0.630 in. lg on bottom0.250 in. deep by 45 deg on top, max surface finish, all surfaces 125microinches aa | Avl | RFQ |
| 204-012-027-001 | 1615-00-497-1962 | general characteristics item description: cres, mil-s-5059 comp 302 annealed, dim., 3.100 in. nom lg, 1.600 in. nom w0.020 in. nom thick, two holes 0.210 in. dia drilled thru 0.425 in. eitherside of vertical centerline and 0.520 in. from bottom, one hole 0.210 in. diadrilled thru on vertical centerline and 2.270 in. from bottom, cornerschamfered 0.190 in. lg by 0.630 in. w on bottom, 0.250 in. lg by 45 deg on top, max surface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 204-012-021-1 | 1615-00-401-6191 | general characteristics item description: lead, qq-l-201 grade b, dim., 1.500 in. nom w at base, 0.700 in. nom w attop, 1.900 in. nom lg, 0.120 in. nom thick, corners rounded by 0.190 in. radiustwo holes 0.280 in. dia drilled thru on vertical centerline 0.440 and 1.440in. from base, max surface finish, all surfaces 125 microinches aa | Avl | RFQ |
| 204-011-025-1 | 1615-00-401-6192 | general characteristics item description: lead, qq-l-201 grade b, dim., 2.000 in. nom lg, 1.800 in. nom w at one end1.580 in. nom w at opposite end, 0.120 in. nom thick, small end tapered fromhorizontal centerline to sides 0.210 in. deep, largest end tapered fromhorizontal centerline to sides 0.470 and 0.500 in. respectively, cornersrounded by 0.250 in. radius, two holes 0.285 in. nom dia drilled thru onhorizontal centerline 0.500 and 1.600 in. from widest end, max surface finishall surfaces 250 microinches aa | Avl | RFQ |
| 204-011-025-001 | 1615-00-401-6192 | general characteristics item description: lead, qq-l-201 grade b, dim., 2.000 in. nom lg, 1.800 in. nom w at one end1.580 in. nom w at opposite end, 0.120 in. nom thick, small end tapered fromhorizontal centerline to sides 0.210 in. deep, largest end tapered fromhorizontal centerline to sides 0.470 and 0.500 in. respectively, cornersrounded by 0.250 in. radius, two holes 0.285 in. nom dia drilled thru onhorizontal centerline 0.500 and 1.600 in. from widest end, max surface finishall surfaces 250 microinches aa | Avl | RFQ |
| 204-010-088-1 | 1615-00-701-4128 | general characteristics item description: lead, qq-l-201 grade b, dim., 2.260 in. nom lg, 1.120 in. nom w at base, 0.560 in. nom w at top, 0.120 in. nom thk, two holes 0.260 in. min, 0.267 in. dia drilled thru on vertical centerline 0.370 in. from base w/1.100in. center to center distance between holes, all corners rounded by 0.0250 in. radius | Avl | RFQ |
| 204-010-088-001 | 1615-00-701-4128 | general characteristics item description: lead, qq-l-201 grade b, dim., 2.260 in. nom lg, 1.120 in. nom w at base, 0.560 in. nom w at top, 0.120 in. nom thk, two holes 0.260 in. min, 0.267 in. dia drilled thru on vertical centerline 0.370 in. from base w/1.100in. center to center distance between holes, all corners rounded by 0.0250 in. radius | Avl | RFQ |
| 1560H13-065-3 | 1615-00-626-8406 | general characteristics item description: cres, mil-s-5059 comp 301 or 302 annealed, dim., 3.000 in. nom lg, 1.100in. nom w, 0.050 in. nom thk, one hole 0.260 in. min, 0.267 in. max dia andone hole 0.376 in. min, 0.382 in. max dia on horizontal centerline 0.600 in.and 2.100 in. respectively from one end | Avl | RFQ |
| 1560H13-065-1 | 1615-00-626-8405 | general characteristics item description: cres, mil-s-5059 comp 301 or 302 annealed, dim., 3.000 in. nom lg, 0.680in. nom w, 0.050 in. nom thk, one hole 0.260 in. min, 0.267 in. max dia andone hole 0.376 in. min, 0.382 in. max dia on horizontal centerline 0.600 in.and 2.100 in. respectively from one end | Avl | RFQ |
| 47-110-371-5 | 1615-00-626-8407 | NA | Avl | RFQ |
| 47-110-371-3 | 1615-00-626-8406 | NA | Avl | RFQ |
| 47-110-371-1 | 1615-00-626-8405 | NA | Avl | RFQ |
| 65150-00038-101 | 1615-00-443-1083 | general characteristics item description: steel, mil-s-18729 comp 4130 cond n, cadmium-plated qq-p-416, primermil-p-8585 o/a, dim., 1.630 in. nom w at center, 1.000 in. nom w at both ends2.750 in. nom o/a lg, 0.063 in. nom thick, two holes 0.358 in. dia drilledthru on vertical centerline 0.630 and 2.130 in. from one end | Avl | RFQ |
| 64151-11031-104 | 1615-00-457-9770 | general characteristics item description: tungsten alloy mil-t-21014 class 1 type 2, primer mil-p-8585, insigniared no. 31136 mil-i-6805, dim., 2.620 in. nom lg, 0.057 in. nom thick, taperedsides, two holes 0.339 in. dia drilled thru 0.468 in. either side of verticalcenterline and 0.560 in. from bottom, one hole 0.339 in. dia drilled thruvertical centerline 2.060 in. from bottom | Avl | RFQ |
|
Quotes within 15 minutes |
|
|
Competitive Prices |
|
|
Dedicated and Knowledgeable |
|
|
AOG Services 24/7 x 365 |
|
|
Same-day |
Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.
Request for Quote
