84A3D-G36-BA0 293 NSN Part from Bourns Instruments Inc with NSN 5905011458749- Request A Quote

Part Number:  84A3D-G36-BA0 293
Alternate P/N:  84A3DG36BA0293
Manufacturer:  bourns instruments inc
NIIN:  01-145-8749
CAGE Code:  3Z867
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37408
Country:  USA
NCB Code:  01

We’re pleased to announce that 84A3D-G36-BA0 293 (Resistor Variable Wire Wound Pre, NSN: 5905-01-145-8749) is now in stock and ready for immediate quoting. This component, manufactured by Bourns Instruments Inc (CAGE Code: 3Z867), is classified under NIIN 01-145-8749 and NCB Code 01 (USA), with additional categorization under FSG 59 Electrical and Electronic Equipment Components/FSC 5905 Resistors and INC 37408. Our team can provide same-day shipping for urgent requirements.

To receive your competitive quote within 15 minutes, simply complete our RFQ form part 84A3D-G36-BA0 293, ensuring all required fields are filled. Our streamlined process guarantees fast, no-obligation pricing so you can secure your supply of 84A3D-G36-BA0 293 without delay. Contact us today to meet your procurement needs efficiently

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 84A3D-G36-BA0 293

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

ASAP Part Services, a trusted subsidiary of ASAP Semiconductor, is a premier distributor of Bourns Instruments Inc components—specializing in obsolete and hard-to-find parts. As an AS9120B, ISO 9001:2015, and FAA AC 0056B certified supplier, we adhere to the highest industry standards under the Aviation Suppliers Association (ASA). Our global network spans 5,000+ top manufacturers, ensuring access to over 2 billion unique parts for critical needs.

With strategically located shipping centers in California, we offer rapid same-day or next-day delivery on in-stock items like 84A3D-G36-BA0 293. Whether you're sourcing rare components or need expedited logistics, we provide reliable solutions to keep your operations moving forward.

NSN Information for Part Number 84A3D-G36-BA0 293 with NSN 5905-01-145-8749, 5905011458749

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-145-8749

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050114587490N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
84A3D-G36-BA0/293525

Characteristics Data of NSN 5905-01-145-8749, 5905011458749

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLERECTANGULAR BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABWVSHAFT DIAMETER0.289 INCHES MINIMUM AND 0.299 INCHES MAXIMUM
ABXFSHAFT LENGTH0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
ADAQBODY LENGTH1.805 INCHES MINIMUM AND 1.861 INCHES MAXIMUM
ADATBODY WIDTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
ADAUBODY HEIGHT0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
AEDQUNDERCUT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,STEPPED
AEDZSHAFT BEARING TYPESLEEVE
AEEASWITCH TYPEPUSH-PULL
AEEDSWITCH VOLTAGE RATING IN VOLTS125.0
AEFDACTUATOR TYPEDUAL CONCENTRIC
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 MINIMUM AND 3610.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE2.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE2.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE48.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 9 OCLOCK
AEFPNONTURN DEVICE RADIUS0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
AEFYSHAFT END PLAY0.014 INCHES
AEFZSHAFT RUNOUT0.006 INCHES
AEGCSHAFT RADIAL PLAY0.005 INCHES
AEGHSWITCH OPERATING POSITIONANY POSITION OF ROTATION TRAVEL
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED
AFJNFRAGILITY FACTORMODERATELY RUGGED
AGQLUNDERCUT LENGTH0.369 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
AJYNSCREW THREAD DIAMETER0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDSWITCH
CBMECUBIC MEASURE0.762 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION50.0 KILOHMS 1ST SECTION AND 250.0 OHMS 2ND SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 MINIMUM AND 3615.0 MAXIMUM
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 ALL SECTIONS
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR ALL SECTIONS
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 ALL SECTIONS
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS1.000 AC
TTQYTERMINAL TYPE AND QUANTITY10 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL -------
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
USA Flag

We are proud to supply every branch of the United States military


Why Choose Us

Quotes within 15 minutes

Competitive Prices

Dedicated and Knowledgeable
Account Managers

AOG Services 24/7 x 365

Same-day
and Next-day Delivery

ASAP Semiconductor’s Certifications and Memberships


Submit an RFQ Form and Get an Interactive Online Quote

Thanks for Visiting ASAP Parts Services!

Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top