64P101 NSN Part from Bourns Instruments Inc with NSN 5905012481888- Request A Quote

Part Number:  64P101
Manufacturer:  bourns instruments inc
NIIN:  01-248-1888
CAGE Code:  32997
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37405
Country:  USA
NCB Code:  01

We’re pleased to announce that 64P101 (Resistor Variable Nonwire Wound, NSN: 5905-01-248-1888) is now in stock and ready for immediate quoting. This component, manufactured by Bourns Instruments Inc (CAGE Code: 32997), is classified under NIIN 01-248-1888 and NCB Code 01 (USA), with additional categorization under FSG 59 Electrical and Electronic Equipment Components/FSC 5905 Resistors and INC 37405. Our team can provide same-day shipping for urgent requirements.

To receive your competitive quote within 15 minutes, simply complete our RFQ form part 64P101, ensuring all required fields are filled. Our streamlined process guarantees fast, no-obligation pricing so you can secure your supply of 64P101 without delay. Contact us today to meet your procurement needs efficiently

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 64P101

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

ASAP Part Services, a trusted subsidiary of ASAP Semiconductor, is a premier distributor of Bourns Instruments Inc components—specializing in obsolete and hard-to-find parts. As an AS9120B, ISO 9001:2015, and FAA AC 0056B certified supplier, we adhere to the highest industry standards under the Aviation Suppliers Association (ASA). Our global network spans 5,000+ top manufacturers, ensuring access to over 2 billion unique parts for critical needs.

With strategically located shipping centers in California, we offer rapid same-day or next-day delivery on in-stock items like 64P101. Whether you're sourcing rare components or need expedited logistics, we provide reliable solutions to keep your operations moving forward.

NSN Information for Part Number 64P101 with NSN 5905-01-248-1888, 5905012481888

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-248-1888

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050124818880NA
CIICHCCESDPMICCriticalityENAC
UAA
Part NumberISCRNVCRNCCHCCMSDSSADC
64P10138E

Characteristics Data of NSN 5905-01-248-1888, 5905012481888

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR
AARGRELIABILITY INDICATORESTABLISHED
AARHRELIABILITY FAILURE RATE LEVEL IN PERCENT0.010
ABJTTERMINAL LENGTH0.300 INCHES MINIMUM
ABWVSHAFT DIAMETER0.075 INCHES NOMINAL
ABXFSHAFT LENGTH0.080 INCHES MAXIMUM
ADAQBODY LENGTH0.375 INCHES NOMINAL
ADATBODY WIDTH0.170 INCHES NOMINAL
ADAUBODY HEIGHT0.375 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION10800.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE5.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE5.00 INCH-OUNCES
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
AFJNFRAGILITY FACTORMODERATELY RUGGED
AGAVEND ITEM IDENTIFICATION1430-01-087-6330,RADAR SET
AXGYMOUNTING METHODTERMINAL
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CBMECUBIC MEASURE0.021 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION100.000 OHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG11160.0 NOMINAL
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
CQTMTERMINAL LOCATIONLEFT ADJACENT SIDE TWO ROWS
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
CXHNSHAFT BEARING TYPESLEEVE
TESTTEST DATA DOCUMENT81349-MIL-R-39035 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQYTERMINAL TYPE AND QUANTITY3 PIN
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-R-39035/2 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications and Memberships


Submit an RFQ Form and Get an Interactive Online Quote

Thanks for Visiting ASAP Parts Services!

Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top