702-0073 NSN Part from Clarostat Sensors And Controls with NSN 5905008439479- Request A Quote

Part Number:  702-0073
Alternate P/N:  7020073
NIIN:  00-843-9479
CAGE Code:  12697
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37408
Country:  USA
NCB Code:  00

We’re pleased to announce that 702-0073 (Resistor Variable Wire Wound Pre, NSN: 5905-00-843-9479) is now in stock and ready for immediate quoting. This component, manufactured by Clarostat Sensors And Controls (CAGE Code: 12697), is classified under NIIN 00-843-9479 and NCB Code 00 (USA), with additional categorization under FSG 59 Electrical and Electronic Equipment Components/FSC 5905 Resistors and INC 37408. Our team can provide same-day shipping for urgent requirements.

To receive your competitive quote within 15 minutes, simply complete our RFQ form part 702-0073, ensuring all required fields are filled. Our streamlined process guarantees fast, no-obligation pricing so you can secure your supply of 702-0073 without delay. Contact us today to meet your procurement needs efficiently

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 702-0073

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

ASAP Part Services, a trusted subsidiary of ASAP Semiconductor, is a premier distributor of Clarostat Sensors And Controls components—specializing in obsolete and hard-to-find parts. As an AS9120B, ISO 9001:2015, and FAA AC 0056B certified supplier, we adhere to the highest industry standards under the Aviation Suppliers Association (ASA). Our global network spans 5,000+ top manufacturers, ensuring access to over 2 billion unique parts for critical needs.

With strategically located shipping centers in California, we offer rapid same-day or next-day delivery on in-stock items like 702-0073. Whether you're sourcing rare components or need expedited logistics, we provide reliable solutions to keep your operations moving forward.

NSN Information for Part Number 702-0073 with NSN 5905-00-843-9479, 5905008439479

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-843-9479

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050084394790N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
2042146623

Characteristics Data of NSN 5905-00-843-9479, 5905008439479

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1.771 INCHES NOMINAL
ABPMBODY DIAMETER0.750 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
ADAQBODY LENGTH0.956 INCHES MINIMUM AND 1.081 INCHES MAXIMUM
ADAVOVERALL DIAMETER1.010 INCHES MAXIMUM
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION308.0 MINIMUM AND 312.0 MAXIMUM
AEFNNONTURN DEVICE LOCATIONAT 12 OCLOCK
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG317.0 MINIMUM AND 323.0 MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR ALL SECTIONS
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 ALL SECTIONS
TTQYTERMINAL TYPE AND QUANTITY6 TURRET
ABXFSHAFT LENGTH0.690 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.380 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEFKMAXIMUM STARTING TORQUE8.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE48.00 INCH-OUNCES
AEFPNONTURN DEVICE RADIUS0.310 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AXGYMOUNTING METHODSTANDARD BUSHING
CQCCELECTRICAL RESISTANCE PER SECTION1.5 KILOHMS ALL SECTIONS
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-1.00 TO 1.00 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
FEATSPECIAL FEATURESEA SECTION INCLUDES 1 DUMMY TERMINAL

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications and Memberships


Submit an RFQ Form and Get an Interactive Online Quote

Thanks for Visiting ASAP Parts Services!

Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top