43P103 NSN Part from Spectrum Instruments Inc with NSN 5905011524782- Request A Quote

Part Number:  43P103
Manufacturer:  spectrum instruments inc
NIIN:  01-152-4782
CAGE Code:  24928
FSG:  59 Electrical and Electronic Equipment Components
Country:  USA
NCB Code:  01

We’re pleased to announce that 43P103 (Resistor Variable Nonwire Wound, NSN: 5905-01-152-4782) is now in stock and ready for immediate quoting. This component, manufactured by Spectrum Instruments Inc (CAGE Code: 24928), is classified under NIIN 01-152-4782 and NCB Code 01 (USA), with additional categorization under FSG 59 Electrical and Electronic Equipment Components/FSC 5905 Resistors and INC . Our team can provide same-day shipping for urgent requirements.

To receive your competitive quote within 15 minutes, simply complete our RFQ form part 43P103, ensuring all required fields are filled. Our streamlined process guarantees fast, no-obligation pricing so you can secure your supply of 43P103 without delay. Contact us today to meet your procurement needs efficiently

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 43P103

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

ASAP Part Services, a trusted subsidiary of ASAP Semiconductor, is a premier distributor of Spectrum Instruments Inc components—specializing in obsolete and hard-to-find parts. As an AS9120B, ISO 9001:2015, and FAA AC 0056B certified supplier, we adhere to the highest industry standards under the Aviation Suppliers Association (ASA). Our global network spans 5,000+ top manufacturers, ensuring access to over 2 billion unique parts for critical needs.

With strategically located shipping centers in California, we offer rapid same-day or next-day delivery on in-stock items like 43P103. Whether you're sourcing rare components or need expedited logistics, we provide reliable solutions to keep your operations moving forward.

Characteristics Data of NSN 5905-01-152-4782, 5905011524782

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1"
AAQLBODY STYLERECTANGULAR"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
ABJTTERMINAL LENGTH0.165 INCHES MINIMUM"
ABWVSHAFT DIAMETER0.095 INCHES NOMINAL"
ABXFSHAFT LENGTH0.060 INCHES NOMINAL"
ADAQBODY LENGTH0.750 INCHES NOMINAL"
ADATBODY WIDTH0.190 INCHES NOMINAL"
ADAUBODY HEIGHT0.250 INCHES NOMINAL"
AEDXSHAFT STYLEROUND, SLOTTED"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION5400.0 NOMINAL"
AEFKMAXIMUM STARTING TORQUE5.00 INCH-OUNCES"
AEFLMAXIMUM RUNNING TORQUE5.00 INCH-OUNCES"
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.500 INCHES NOMINAL"
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS"
AXGYMOUNTING METHODTERMINAL"
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL"
CBMEIII CUBIC MEASURE0.036 CUBIC INCHES"
CQCCELECTRICAL RESISTANCE PER SECTION10.000 PERCENT, RATED AMPERES C AND BETTER FLOORING"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG5400.0 NOMINAL"
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.200 NOMINAL INCHES"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION"
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0/+100.0 SINGLE SECTION"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 7TH SECONDARY QUALITY"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 SINGLE SECTION"
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION"
CSDLUNABLE TO DECODEUNABLE TO DECODE"
TTQYTERMINAL TYPE AND QUANTITY3 PIN"
AAPNSECTION QUANTITY1"
AAQLBODY STYLERECTANGULAR"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
ABJTTERMINAL LENGTH0.165 INCHES MINIMUM"
ABWVSHAFT DIAMETER0.095 INCHES NOMINAL"
ABXFSHAFT LENGTH0.060 INCHES NOMINAL"
ADAQBODY LENGTH0.750 INCHES NOMINAL"
ADATBODY WIDTH0.190 INCHES NOMINAL"
ADAUBODY HEIGHT0.250 INCHES NOMINAL"
AEDXSHAFT STYLEROUND, SLOTTED"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION5400.0 NOMINAL"
AEFKMAXIMUM STARTING TORQUE5.00 INCH-OUNCES"
AEFLMAXIMUM RUNNING TORQUE5.00 INCH-OUNCES"
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.500 INCHES NOMINAL"
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS"
AXGYMOUNTING METHODTERMINAL"
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL"
CBMEIII CUBIC MEASURE0.036 CUBIC INCHES"
CQCCELECTRICAL RESISTANCE PER SECTION10.000 PERCENT, RATED AMPERES C AND BETTER FLOORING"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG5400.0 NOMINAL"
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.200 NOMINAL INCHES"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION"
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0/+100.0 SINGLE SECTION"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 7TH SECONDARY QUALITY"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 SINGLE SECTION"
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION"
CSDLUNABLE TO DECODEUNABLE TO DECODE"
TTQYTERMINAL TYPE AND QUANTITY3 PIN"

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q22tex-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
USA Flag

We are proud to supply every branch of the United States military


Why Choose Us

Quotes within 15 minutes

Competitive Prices

Dedicated and Knowledgeable
Account Managers

AOG Services 24/7 x 365

Same-day
and Next-day Delivery

ASAP Semiconductor’s Certifications and Memberships


Submit an RFQ Form and Get an Interactive Online Quote

Thanks for Visiting ASAP Parts Services!

Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top