L27075 NSN Part from State Electronics Parts Corp with NSN 5905012673586- Request A Quote

Part Number:  L27075
NIIN:  01-267-3586
CAGE Code:  7A378
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37405
Country:  USA
NCB Code:  01

We’re pleased to announce that L27075 (Resistor Variable Nonwire Wound, NSN: 5905-01-267-3586) is now in stock and ready for immediate quoting. This component, manufactured by State Electronics Parts Corp (CAGE Code: 7A378), is classified under NIIN 01-267-3586 and NCB Code 01 (USA), with additional categorization under FSG 59 Electrical and Electronic Equipment Components/FSC 5905 Resistors and INC 37405. Our team can provide same-day shipping for urgent requirements.

To receive your competitive quote within 15 minutes, simply complete our RFQ form part L27075, ensuring all required fields are filled. Our streamlined process guarantees fast, no-obligation pricing so you can secure your supply of L27075 without delay. Contact us today to meet your procurement needs efficiently

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for L27075

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

ASAP Part Services, a trusted subsidiary of ASAP Semiconductor, is a premier distributor of State Electronics Parts Corp components—specializing in obsolete and hard-to-find parts. As an AS9120B, ISO 9001:2015, and FAA AC 0056B certified supplier, we adhere to the highest industry standards under the Aviation Suppliers Association (ASA). Our global network spans 5,000+ top manufacturers, ensuring access to over 2 billion unique parts for critical needs.

With strategically located shipping centers in California, we offer rapid same-day or next-day delivery on in-stock items like L27075. Whether you're sourcing rare components or need expedited logistics, we provide reliable solutions to keep your operations moving forward.

NSN Information for Part Number L27075 with NSN 5905-01-267-3586, 5905012673586

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-267-3586

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050126735860NA
CIICHCCESDPMICCriticalityENAC
UAA
Part NumberISCRNVCRNCCHCCMSDSSADC
11188-0031C95

Characteristics Data of NSN 5905-01-267-3586, 5905012673586

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLERECTANGULAR BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABPAUNDERCUT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
ABXFSHAFT LENGTH1.188 INCHES MINIMUM AND 1.252 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
ADAQBODY LENGTH1.031 INCHES MINIMUM AND 1.093 INCHES MAXIMUM
ADATBODY WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
ADAUBODY HEIGHT0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,STEPPED
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS28.0
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION235.0 MINIMUM AND 245.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE3.50 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE3.50 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE56.00 INCH-OUNCES
AEFYSHAFT END PLAY0.020 INCHES
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED
AFJNFRAGILITY FACTORMODERATELY RUGGED
AGQLUNDERCUT LENGTH0.388 INCHES MINIMUM AND 0.452 INCHES MAXIMUM
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
ARNHOPERATING POSITIONSTART OF ROTATION
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDHUMIDITY PROOF AND SWITCH
CBMECUBIC MEASURE0.308 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION2.5 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG290.0 MINIMUM AND 300.0 MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 ALL SECTIONS
CQTMTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR ALL SECTIONS
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 1ST SECTION AND-5.0 TO 5.0 2ND SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 ALL SECTIONS
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS0.125 DC
CXHNSHAFT BEARING TYPEBEARING
TTQYTERMINAL TYPE AND QUANTITY8 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications and Memberships


Submit an RFQ Form and Get an Interactive Online Quote

Thanks for Visiting ASAP Parts Services!

Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top