SS1-11 NSN Part from W M Berg Inc with NSN 5935012111550- Request A Quote

Part Number:  SS1-11
Alternate P/N:  SS111
Manufacturer:  w m berg inc
NIIN:  01-211-1550
CAGE Code:  29440
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  15093
Country:  USA
NCB Code:  01
We’re pleased to announce that part number SS1-11 is now available and in stock. This is a Connector Receptacle Electrical with NSN 5935-01-211-1550 manufactured by W M Berg Inc. You can now request a near instantaneous quote for part number SS1-11, just fill out the Request for Quote (RFQ) provided here to get started.

As you fill out the RFQ for SS1-11, make sure that all fields, especially the asterisk-marked ones like Need Parts By and Quantity (ea), are completely filled out. Our sales team will be using your response to these fields in order to understand your requirements and calculate your quote accordingly. And they will contact you with your final quote within 15 minutes or less.  

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SS1-11

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

ASAP Part Services, owned and operated by ASAP Semiconductor, is an experienced and leading distributor of obsolete and hard-to-find aviation and electronic parts in the United States. We are an AS9120B, ISO 9001:2015, and FAA AC 0056B certified member of the Aviation Suppliers Association (ASA). Our vast and comprehensive inventory has more than 2 billion unique parts sourced from over 5000 industry-leading manufacturers like W M Berg Inc from around the world. And we can ship the part like SS1-11 to you with same-day or next-day shipping thanks to our shipping centers in California.

For any questions or concerns, feel free to call us at +1-714-705-4780, or email us at sales@asap-partservices.com. We’re always available and ready to help, 24/7x365. And if you’re interested in a faster and more convenient purchasing platform.

NSN Information for Part Number SS1-11 with NSN 5935-01-211-1550, 5935012111550

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-211-1550

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350121115500PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
3VH30/1JNK1293

Characteristics Data of NSN 5935-01-211-1550, 5935012111550

MRCCriteriaCharacteristic
AAQLBODY STYLESTRAIGHT EDGE TYPE W/MOUNTING FLANGE
ABHPOVERALL LENGTH3.835 INCHES NOMINAL
ABKWOVERALL HEIGHT0.810 INCHES NOMINAL
ABMKOVERALL WIDTH0.370 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONHEAT RESISTANT
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.125 INCHES NOMINAL
AEJNDISTANCE BETWEEN MOUNTING FACILITY CENTERS3.575 INCHES NOMINAL
AFQPBOARD ACCOMMODATED LENGTH3.100 INCHES NOMINAL
AFQVBOARD ACCOMMODATED WIDTH0.054 INCHES MINIMUM AND 0.071 INCHES MAXIMUM
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLE2 ROWS OF INDEPENDENT CONTACTS INSERTED BOARD SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS3.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRECONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS600.0 SINGLE MATING END SINGLE CONTACT GROUPING
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC DIALLYL PHTHALATE SINGLE MATING END
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TY 2 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPEPIN SINGLE MATING END SINGLE CONTACT GROUPING
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-14 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CXCGINCLUDED CONTACT QUANTITY60 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEBIFURCATED SPRING SINGLE MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.060 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD

Schedule B & Trade

End Use : 12300 Finished metal shapes
Schedule B : 7318220000 (NAICS 332722) Washers other than lock washers, iron or steel
SITC : 69422 Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, not threaded, of iron or steel

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL T2200x-
Quantity per pack No qup
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 095190 - Hardware, noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 573 - Bolts or nuts (iron or steel),(less than 35 feet)

ASAP Semiconductor’s Certifications and Memberships


Submit an RFQ Form and Get an Interactive Online Quote

Thanks for Visiting ASAP Parts Services!

Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top